The MR900 series depositor is pneumatically operated and can be supplied with four sizes of product cylinder. This provides an accurate depositing weight range of 20-1250g, up to 60 cycles per minute. The machine is extremely robust and is designed to withstand the most demanding conditions with the minimum maintenance. ‘Lubrication free’ pneumatic components can be fitted as an option.
Many types of outlets can be supplied for example: General Purpose Outlets for liquids and solids in suspension, vertical movement Suck Back Outlets which can be fitted with individually designed decorating heads to suit specific requirements. Rotary spade cut off nozzles to provide a full cover spread of material in or over a specific area.
All existing depositors can be fitted with a CIP (clean in place) Retro Kit for incorporation into existing CIP systems or can be supplied with Apple’s own stand alone CIP unit.
The MR2000 Depositor is a precision built unit which operates by compressed air. Each unit has the capability of depositing between 100–2000ml per cycle, ensuring a high degree of accuracy throughout the weight range. The MR2000 depositor is a versatile machine designed to be simple and efficient in operation. With minimal moving parts in contact with the product, cleaning time is kept at a minimum and routine maintenance suitable for semi-skilled operators. A wide range of nozzles/dispersing heads and special outlets are available and easily interchanged to maximize the units capability to suit all customers requirements. Product variability poses no problems for the MR2000 as various equipment is available to allow both liquid and viscose products to be handled efficiently either via gravity feed hopper (with or without auger screw) or direct via pressure feed systems whichever is the most suited to customer requirements.
The MINI-METERITE MR150 series depositor is fitted with a standard product cylinder giving a weight range of 2-150ml. The weight control is easily adjusted in seconds. The machine is available with a standard 14 liter or 28 liter conical hopper, however common hoppers with multiple outlets can be supplied (for multi lane systems). A total of 250mm of height adjustment is available when the unit is fitted to the telescopic stand. An intermediate height stand can be supplied for use with the flexible handgun outlet.
The MD65 series Micro Depositor was designed to compliment the existing range of Apple depositors, particularly to offer unbelievable accuracy over a small deposit range and provide a speed uncommon in most volumetric filling machines. A cycle rate of up to 90 cycles per minute is possible. Typical products range from smooth sauces and homogenized creams to particulate materials like Vol au Vent fillings and sweet mincemeat's. Accuracy to within 0.2g is common on most materials. Reliability in demanding operating conditions is guaranteed due to robust design, full pneumatic operation and total stainless steel construction
Simplicity is the main feature of the Low level Easy Fill MR900, allowing unskilled operators to easily strip down the machine for cleaning and product changeovers. Deposit volume and speed controls can be adjusted in seconds. The MR900 series depositor is pneumatically operated and can be supplied with four sizes of product cylinder. This provides an accurate depositing weight range of 20-1250g, up to 60 cycles per minute. The machine is extremely robust and is designed to withstand the most demanding conditions with minimum maintenance. ‘Lubrication free’ pneumatic components can be fitted as an option.
The New PRO-PORTIONER 20 is an all electric tabletop depositing system designed to deposit a wide range of smooth free-flowing products to an outstanding repeatable accuracy through it’s easy to use operator panel. The pro-portioner can be fitted with a wide range of outlets. The outlets can range from a simple tube outlet to a flexible hand gun with trigger for depositing liquids, gels, batters (even with small particulates) to injection needles (to inject cakes, buns, with jams creams etc). The quick strip down feature for cleaning and hygiene is a real benefit on short product run changeovers, making it ideally suited for laboratories, test kitchens and small to medium production facilities.
The ED300 Series Electro/Pneumatic Depositor has been specifically designed to meet the demands of today's automated production industry. All machine adjustments for depositing volumes and operating speeds are rapidly selected on the user friendly operator panel. A pre-programmed menu is available for multiple product selection. Maintenance and operation diagnostics are easily monitored to enhance production efficiency. The ED300 Electro/Pneumatic depositor can be supplied for single or multi lane applications with mounting configurations to suit individual requirements. The depositor incorporates a safety device which guarantees the power supply is isolated prior to disassembly.
